TRENDnet TL2-E284 - Snmp Group

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
17-4
Command
snmp engineid <EngineIdentifier>
no snmp engineid
Syntax Description
EngineIdentifier
A string of between 5 and 32 octets expressed in
hexadecimal that is separated by dots
Default Settings
80.00.08.1c.04.46.53
Command Modes
Global Configuration Mode
User Guidelines
SNMP engine ID is unique for each switches
Example
switch(config)# snmp engineid 80.00.08.1c.04.46.ae
Command History
Version
History
1.00.001
This command was introduced
snmp group
To create a SNMP group and the no form deletes the group
Command
snmp group <GroupName> user <UserName> security-model {v1 |
v2c | v3 } [{volatile | nonvolatile}]
no snmp group <GroupName> user <UserName> security-model {v1
| v2c | v3 }
Syntax Description
GroupName
SNMP group name
user UserName
Specify the user name
security-model v1
SNMP version 1 is to be used
security-model v2c
SNMP version 2v is to be used
security-model v3
SNMP version 3 is to be used
volatile
Store in volatile memory
nonvolatile
Store in nonvolatile memory