TRENDnet TL2-E284 - Chapter 35 Acl Command; Acl Command List; Mac Access-List Extended; Ip Access-List

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
35-1
Chapter 35
ACL Command
ACL Command List
 mac access-list extended
 ip access-list
 deny (MAC Access List Configuration)
 permit (MAC Access List Configuration)
 deny (Standard IP Access List Configuration)
 permit (Standard IP Access List Configuration)
 deny (Extended IP Access List Configuration)
 permit (Extended IP Access List Configuration)
 deny icmp (Extended IP Access List Configuration)
 permit icmp (Extended IP Access List Configuration)
 mac access-group
 ip access-group
 show access-lists
mac access-list extended
To create and enter a MAC access control list.
Command
mac access-list extended <access-list-number (1-65535)>
no mac access-list extended <short (1-65535)>
Syntax Description
access-list-number
(1-65535)
Specify the ID of access control list.
short (1-65535)
Specify the ID of access control list.
Command Modes
Global Configuration Mode
User Guidelines
1. Using no form to delete the access control list.
2. The ID cannot be duplicated for all access control list.
Example
switch(config)# mac access-list extended 1
switch(config-ext-macl)#
Command History
Version
History
1.00.001
This command was introduced
ip access-list
To create and enter an IP access control list.