TRENDnet TL2-E284 - Spanning-Tree Mode

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
28-2
Command
spanning-tree compatibility {stp|rst|mst}
no spanning-tree compatibility
Syntax Description
stp
Compatible wirh STP.
rst
Compatible with RSTP.
mst
Compatible with MSTP.
Default Settings
rst
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reset the STP compatibility to default.
Example
switch(config)# spanning-tree compatibility stp
Command History
Version
History
1.00.001
This command was introduced
spanning-tree mode
To choose the spanning tree opreation mode.
Command
spanning-tree mode {mst|rst}
Syntax Description
mst
Operates with MSTP mode.
rst
Operates with RSTP mode
Default Settings
rst
Command Modes
Global Configuration Mode
User Guidelines
If the configured mode is not the same with current running mode, spanning tree
will be shutdown and restart.
Example
switch(config)# spanning-tree mode mst
switch(config)# spanning-tree mode rst
Spanning Tree protocol enabled is MST. Now MST is being shutdown
and RST is being enabled
Command History
Version
History
1.00.001
This command was introduced