TRENDnet TL2-E284 - Show Dot

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
31-10
Syntax Description
all
Displays all RADIUS debug messages.
errors
Displays the error code debug messages.
events
Displays the event related debug messages.
packets
Displays the packet related debug messages.
responses
Displays the server response related debug messages.
timers
Displays the timer related debug messages.
Default Settings
Disable
Command Modes
Privileged EXEC Mode
User Guidelines
Using no form to disable the debug mode.
Example
switch# debug radius all
Command History
Version
History
1.00.001
This command was introduced
show dot1x
To display the status, settings and information of 802.1X function.
Command
show dot1x [{ interface <interface-type> <interface-id> |
statistics interface <interface-type> <interface-id> |
local-database | all }]
Syntax Description
interface
interface-type
interface-id
Specify which interface to show 802.1X status and settings.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
statistics
Display 802.1X statistics of a specific interface.
interface
interface-type
interface-id
Specify which interface to show 802.1X statistics.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
local-database
Display 802.1X local user database information
all
Display 802.1X status and settings for all interfaces.
Command Modes
Privileged EXEC Mode
User Guidelines
System will display global 802.1X global status when executing the command
without any parameter.