TRENDnet TL2-E284 - Chapter 27 Dynamic Vlan Command; Dynamic Vlan Command List; Set Gvrp; Set Port Gvrp

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
27-1
Chapter 27
Dynamic VLAN Command
Dynamic VLAN Command List
 set gvrp
 set port gvrp
 set garp timer
 vlan restricted
 shutdown garp
 debug garp
 show garp timer
set gvrp
To global enable/disable GVRP function.
Command
set gvrp { enable | disable }
Syntax Description
enable
Enables GVRP globally.
disable
Disable GVRP globally.
Default Settings
Enable
Command Modes
Global Configuration Mode
Example
switch(config)# set gvrp disable
Command History
Version
History
1.00.001
This command was introduced
set port gvrp
To enable/disable gvrp on specific ports.
Command
set port gvrp <interface-type> <interface-id> { enable |
disable }