TRENDnet TL2-E284 - Shutdown Port-Channel; Show Etherchannel

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
30-5
Example
switch(config-if)# lacp wait-time 0
Command History
Version
History
1.00.001
This command was introduced
shutdown port-channel
To shutdown the port channel group.
Command
shutdown port-channel
no shutdown port-channel
Default Settings
Active
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reactivate the port channel group.
Example
switch(config)# shutdown port-channel
Command History
Version
History
1.00.001
This command was introduced
show etherchannel
To display the information of port channel groups.
Command
show etherchannel [<channel-group-number> { detail |
load-balance | port | port-channel | summary | protocol}]
Syntax Description
channel-grou
p-number
Specify the information of which port channel group to
display.
detail
Displays the detailed information of the etherchannel.
load-balance
Displays the load-balance or frame-distribution scheme
among ports in the port channel of the etherchannel.
port
Displays the port information of the etherchannel.
port-channel
Displays the port-channel of the etherchannel.
summary
Displays summary of the etherchannel.
protocol
Displays protocol used in the etherchannel.
Command Modes
Privileged EXEC Mode