TRENDnet TL2-E284 - Show Snmp User; Show Snmp Viewtree

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
17-18
show snmp user
To display the SNMP user information
Command
show snmp user
Command Modes
Privileged EXEC Mode
Example
switch# show snmp user
Engine ID : 80.00.08.1c.04.46.53
User : initial
Authentication Protocol : None
Privacy Protocol : None
Storage Type : Non-volatile
Row Status : Active
------------------------------
Engine ID : 80.00.08.1c.04.46.53
User : ReadOnly
Authentication Protocol : None
Privacy Protocol : None
Storage Type : Non-volatile
Row Status : Active
------------------------------
Engine ID : 80.00.08.1c.04.46.53
User : ReadWrite
Authentication Protocol : None
Privacy Protocol : None
Storage Type : Non-volatile
Row Status : Active
------------------------------
Engine ID : 80.00.08.1c.04.46.53
User : templateMD5
Authentication Protocol : MD5
Privacy Protocol : None
Storage Type : Non-volatile
Row Status : Active
------------------------------
Engine ID : 80.00.08.1c.04.46.53
User : templateSHA
Authentication Protocol : SHA
Privacy Protocol : DES_CBC
Storage Type : Non-volatile
Row Status : Active
------------------------------
Command History
Version
History
1.00.001
This command was introduced
show snmp viewtree
To display SNMP view information