TRENDnet TL2-E284 - Chapter 41 Rmon Command; Rmon Command List; Set Rmon; Rmon Alarm

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
41-1
Chapter 41
RMON Command
RMON Command List
 set rmon
 rmon alarm
 rmon event
 rmon collection history
 rmon collection stats
 show rmon
set rmon
To enable or disable RMON function.
Command
set rmon { enable | disable }
Syntax Description
enable
Enable RMON.
disable
Disable RMON.
Default Settings
Disable
Command Modes
Global Configuration Mode
Example
switch(config)# set rmon enable
Command History
Version
History
1.00.001
This command was introduced
rmon alarm
To set a RMON alarm on a MIB object.
Command
rmon alarm < number (1-65535)> <mib-object-id (255)>
<sample-interval-time (1-2147482647)> {absolute | delta }
rising-threshold <value (0-2147483647)> <rising-event-number
(1-65535)> falling-threshold <value (0-2147483647)>
<falling-event-number (1-65535)> [owner <ownername (127)>]
no rmon alarm <number (1-65535)>