TRENDnet TL2-E284 - Chapter 42 Statistics Command; Statistics Command List; Clear Interfaces; Show Ip Traffic

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
42-1
Chapter 42
Statistics Command
Statistics Command List
 clear interfaces
 show ip traffic
clear interfaces
To clear counters of interfaces.
Command
clear interfaces [ <interface-type> <interface-id> ] counters
Syntax Description
interface-type
interface-id
Specify which counters of which interface to clear.
Interface-type including Fa (Fast Ethernet), Gi (Gigabit
Ethernet) or port-channel.
Interface-id is slot/port number or port channel ID.
Command Modes
Privileged EXEC Mode
User Guidelines
System will clear all interface counters when executing the command without a
interface type and ID.
Example
switch# clear interfaces counters
switch# clear interfaces fa 0/1 counters
Command History
Version
History
1.00.001
This command was introduced
show ip traffic
To display the statistic of IP traffic and ICMP traffic
Command
show ip traffic
Command Modes
Privileged EXEC Mode