TRENDnet TL2-E284 - Show Ip Igmp Snooping; Show Ip Igmp Snooping Forwarding-Database

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
32-9
Command History
Version
History
1.00.001
This command was introduced
show ip igmp snooping
To display current settings of IGMP snooping function.
Command
show ip igmp snooping [Vlan <vlan id>]
Syntax Description
Vlan vlan id
Command Modes
Privileged EXEC Mode
Example
switch# show ip igmp snooping
Snooping VLAN Configuration for the VLAN 1
IGMP Snooping enabled
IGMP configured version is V2
IGMP Operating version is V2
Fast leave is disabled
Snooping switch is configured as Non-Querier
Snooping switch is acting as Non-Querier
Query interval is 125 seconds
Command History
Version
History
1.00.001
This command was introduced
show ip igmp snooping forwarding-database
To display the addresses information in IGMP forwarding database.
Command
show ip igmp snooping forwarding-database [Vlan <vlan id>]
Syntax Description
Vlan vlan id
Command Modes
Privileged EXEC Mode
User Guidelines
System will display multicast addresses in FDB when executing the command
without a given VLAN parameter.
Example
switch# show ip igmp snooping forwarding-database vlan 1
Vlan MAC-Address Ports
---- ----------------- -----
1 01:00:5e:7f:ff:64 Fa0/9