TRENDnet TL2-E284 - Chapter 12 System Information Command; System Information Command List; System Name

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
12-1
Chapter 12
System Information Command
System Information Command List
 system name
 system contact
 system location
 system web-timeout
 system cli-timeout
 default ip address
 default ip address allocation protocol
 default mode
 default restore
 default restore-file
 default vlan id
 set ip http
 ip http port
 show system information
 show nvram
 show http server status
 show ip information
 show line console
system name
To define the name of the Switch
Command
system name <identify info>
Syntax Description
identify info
A maximum of 15 characters is allowed. A NULL string is not
accepted.
Default Settings
SysName
Command Modes
Global Configuration Mode
User Guidelines
This command defines the name of the Switch.
Example
switch(config)# system name trendnet
Command History
Version
History
1.00.001
This command was introduced.