TRENDnet TL2-E284 - Ip Igmp Snooping Clear Counters; Ip Igmp Snooping Group-Query-Interval; Ip Igmp Snooping Mrouter

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
32-2
ip igmp snooping clear counters
To clear the IGMP snooping. counters
Command
ip igmp snooping clear counters [Vlan <vlanid (1-4094)>]
Syntax Description
Vlan vlanid
(1-4094)
Specify the counters of which VLAN to clear.
Command Modes
Global Configuration Mode
User Guidelines
System will clear all IGMP counters when executing this command without a
VLAN parameter.
Example
switch(config)# ip igmp snooping clear counters vlan 1
Command History
Version
History
1.00.001
This command was introduced
ip igmp snooping group-query-interval
To set up the time interval to send the group specific query.
Command
ip igmp snooping group-query-interval <(1-5) seconds>
no ip igmp snooping group-query-interval
Syntax Description
(1-5) seconds
Specify the time interval to send IGMP query.
Default Settings
2 seconds
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reset the time interval to default.
Example
switch(config)# ip igmp snooping group-query-interval 5
Command History
Version
History
1.00.001
This command was introduced
ip igmp snooping mrouter
To configure static IGMP multicast router ports on a specific VLAN.