TRENDnet TL2-E284 - Chapter 33 Static Mac Entries Command; Static Mac Entries Command List; Mac-Address-Table Aging-Time; Mac-Address-Table Static Multicast

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
33-1
Chapter 33
Static MAC Entries Command
Static MAC Entries Command List
 mac-address-table aging-time
 mac-address-table static multicast
 mac-address-table static unicast
 show mac-address-table
 show mac-address-table aging-time
 show mac-address-table count
 show mac-address-table dynamic multicast
 show mac-address-table dynamic unicast
 show mac-address-table static multicast
 show mac-address-table static unicast
mac-address-table aging-time
To set the aging time of L2 Forwarding Database (FDB).
Command
mac-address-table aging-time <10-1000000 seconds>
no mac-address-table aging-time
Syntax Description
10-1000000
seconds
Specify the aging time if L2 FDB.
Default Settings
300
Command Modes
Global Configuration Mode
Example
switch(config)# mac-address-table aging-time 100
Command History
Version
History
1.00.001
This command was introduced
mac-address-table static multicast
To create a static multicast entry in L2 FBD.