TRENDnet TL2-E284 - Revision; Spanning-Tree Mst Hello-Time

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
29-4
Default Settings
00: 00: 00: 00: 00: 00
Command Modes
MSTP Configuration Mode
User Guidelines
Using no form the reset the name to default.
Example
switch(config-mst)# name trendnet
Command History
Version
History
1.00.001
This command was introduced
revision
To set the revision number for the MST reigon.
Command
revision <value(0-65535)>
no revision
Syntax Description
value(0-65535)
Specify the number of revision.
Default Settings
0
Command Modes
MSTP Configuration Mode
User Guidelines
Using no form to reset the revision number to default.
Example
switch(config-mst)# revision 1
Command History
Version
History
1.00.001
This command was introduced
spanning-tree mst hello-time
To set the MST hello time to a port.
Command
spanning-tree mst hello-time <value(1-2)>
no spanning-tree mst hello-time
Syntax Description
value(1-2)
Specify the hello time value of the port.
Default Settings
2 seconds