TRENDnet TL2-E284 - User Account; Management Vlan

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
5-2
Figure 9 – System > System Information
Parameter
Description
Hardware Version
The hardware version of this device.
Firmware Version
The firmware version of the device.
Device Name
The name of the device. Default is TL2-E284.
Device Contact
The identification information of a contact person. Default is SysContact.
Device Location
Entering the device location description. Maximum of 50 characters is allowed
and a null string is not accepted. Default is SysLocation.
Device Up Time
The time duration since the system has been up and running.
Switch MAC Address
The MAC address of the device.
Web Aut0 Timeout
(180-3600 secs)
The duration that the device times out when no user activity occurs on the
web interface. Default is 600 seconds.
CLI Auto Timeout
(1-18000 secs)
The duration that the device times out when no user activity occurs on the
web interface. Default is 1800 seconds.
Click Apply to submit the changes.
User Account
This page is to create and display user account information.
Figure 10 – System > User Account
Parameter
Description
User Name
Username of an account.
Password
Password of an account.
Privilege (1-15)
Privilege level that ranges from 1 to 15. 15 are the highest level.
Click ADD to submit the changes and the Reset button will clear the information. Select and click Delete to
remove an existed account. The default accounts are admin (privilege 15) and guest (privilege 1).
Management VLAN
This page is to edit the management VLAN information.