TRENDnet TL2-E284 - Mailserver

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
20-2
Syntax Description
ip-address
IP address of the syslog server
buffered size (1-200)
The size of internal logging buffer
console
Enable logging to the console
Facility local0~7
Specifies the facility that is indicated in the
message. Possible values: local0, local1, local2,
local3, local4, local5, local 6, local7
trap
Enable trap messages
level (0-7)
Severity levels
alerts
Alert level: action must be taken immediately
critical
Critical level: Critical conditions
debugging
Debug level: Debug messages
emergencies
Emergency level: System is unusable
errors
Error level: Error conditions
informational
Informational level: Informational messages
notification
Notification level: Normal but significant condition
warnings
Warning level: Warning conditions
on
Enable the syslog
Default Settings
Logging: Enabled
Console: Disabled
Timestamp: Enabled
Trap: Informational
IP address: None
Facility: Local0
Buffered: 50
Command Modes
Global Configuration Mode
Example
switch(config)# logging console
Command History
Version
History
1.00.001
This command was introduced
mailserver
Specify the IP address of mail server to be used for sending the lemail alerts
messages. The no form resets the setting.
Command
mailserver <ip-address>
no mailserver