TRENDnet TL2-E284 - Debug Garp; Show Garp Timer

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
27-4
debug garp
To enable the debug mode of GARP function.
Command
debug garp { global | [{protocol | gvrp | redundancy} [initshut]
[mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]]}
no debug garp { global | [{protocol | garp | redundancy}
[initshut] [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer]
[all]]
Syntax Description
global
Displays the global GARP debug messages for multiple
instances.
protocol
Displays the protocol related debug messages.
Gvrp
Displays the GVRP related debug messages.
Redundancy
Displays the redundancy related debug messages.
Initshut
Displays the initial and shutdown debug messages.
Mgmt
Displays the management related debug messages.
Data
Displays the data path debug messages.
Ctpl
Displays the control plane debug messages.
dump
Displays the packet dump debug messages.
Os
Displays the debug messages for all resources except
buffer.
Failall
Displays the all failure messages.
Buffer
Displays the buffer debug messages.
all
Displays all debug messages.
Default Settings
Disable
Command Modes
Privileged EXEC Mode
Example
switch#
Command History
Version
History
1.00.001
This command was introduced
show garp timer
To display the port timer settings.
Command
show garp timer [{ port <interface-type> <interface-id>}]