TRENDnet TL2-E284 - Rmon Collection History; Rmon Collection Stats

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
41-3
Command Modes
Global Configuration Mode
User Guidelines
1. RMON function must be enabled and RMON event must be configured before
configuring alarms.
2. Using no form to delete events from RMON event table.
Example
switch(config)# rmon event 1 description broadcast-too-high log
owner trendnet trap redalert
Command History
Version
History
1.00.001
This command was introduced
rmon collection history
To enable and setup the RMON collection history on a port.
Command
rmon collection history <index (1-65535)> [buckets
<bucket-number (1-50)>] [interval <seconds (1-3600)>] [owner
<ownername (127)>]
no rmon collection history <index (1-65535)>
Syntax Description
index (1-65535)
Specify the index of history table.
buckets
bucket-number (1-50)
The maximum number of RMON history collection.
interval seconds
(1-3600)
The time interval for the history collection.
owner ownername (127)
Specify the owner of the history group.
Command Modes
Interface Configuration Mode
User Guidelines
1. RMON function must be enabled and RMON event must be configured before
configuring alarms.
2. Using no form to disable the history collection..
Example
switch(config-if)# rmon collection history 1 buckets 50
interval 10 owner trendnet
Command History
Version
History
1.00.001
This command was introduced
rmon collection stats
To enable and setup the RMON statistics collection on a port.