TRENDnet TL2-E284 - Ip Igmp Snooping Report-Suppression-Interval; Ip Igmp Snooping Retry-Count

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
32-5
Command
ip igmp snooping report-forward {all-ports | router-ports}
no ip igmp snooping report-forward
Syntax Description
all-ports
To forward IGMP reports to all ports.
router-ports
To forward IGMP reports to router ports.
Default Settings
Router ports
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reset the forwarding port to default.
Example
switch(config)# ip igmp snooping report-forward all-ports
Command History
Version
History
1.00.001
This command was introduced
ip igmp snooping report-suppression-interval
To set the time interval that IGMPv2 report of the same group will not be
forwarded to the router ports
Command
ip igmp snooping report-suppression-interval <(1 - 25) seconds>
no ip igmp snooping report-suppression-interval
Syntax Description
(1-25) seconds
Specify the report suppression time interval.
Default Settings
5 seconds
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reset the time interval to default.
Example
switch(config)# ip igmp snooping report-suppression-interval
10
Command History
Version
History
1.00.001
This command was introduced
ip igmp snooping retry-count
To set the maximum retries for group specific queries which sent to a port