TRENDnet TL2-E284 - Show Vlan Port Config

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
40-4
Command Modes
Privileged EXEC Mode
Example
switch# show vlan traffic-classes
Traffic Class table
---------------------
Priority Traffic Class
--------- -------------
0 0
1 0
2 1
3 1
4 2
5 2
6 3
7 3
Command History
Version
History
1.00.001
This command was introduced
show vlan port config
To display the VLAN settings of ports
Command
show vlan port config [{port <interface-type> <interface-id>}]
Syntax Description
port
interface-type
interface-id
Specified which interface to display vlan configurations.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Command Modes
Privileged EXEC Mode
User Guidelines
System will display the information of all ports when executing the command
without a given port parameter.
Example
switch# show vlan port config port fa 0/1
Vlan Port configuration table
-------------------------------
Port Fa0/1
Port Vlan ID : 1
Port Acceptable Frame Type : Admit All
Port Ingress Filtering : Enabled
Port Mode : Hybrid
Port Gvrp Status : Enabled
Port Gvrp Failed Registrations : 0
Gvrp last pdu origin : 00:00:00:00:00:00
Port Restricted Vlan Registration : Disabled
Default Priority : 0
-------------------------------------------------------