24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
31-2
dot1x system-auth-control
To enable 802.1X authentication on the Switch.
dot1x system-auth-control
no dot1x system-auth-control
Global Configuration Mode
Using no form to disable the 802.1X authentication.
switch(config)# dot1x system-auth-control
This command was introduced
aaa authentication dot1x default
To choose local or RADIUS database for 802.1X authentication.
aaa authentication dot1x default { group radius | local}
Using the database on RADIUS server.
Using the local database.
Global Configuration Mode
switch(config)# aaa authentication dot1x default group radius
This command was introduced
To create user information in local database.
To Next Page
Loading...
