TRENDnet TL2-E284 - Page 211

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
31-3
Command
dot1x local-database <username> password <password> permission
{allow | deny} [<auth-timeout (value(0-7200))>] [interface
<interface-type> <interface-list>]
no dot1x local-database <username>
Syntax Description
username
Specify the user name of a local database entry.
password
password
Specify the password of a local database entry.
permission allow
Specify the user is allowed to access ports configured.
permission deny
Specify the user is not allowed to access ports
configured.
auth-timeout
(value(0-7200))
Time interval between authentication attmpts.
interface
interface-type
interface-list
Port list the 802.1X authentication can be applied.
Default Settings
Permission – allow
Auth-timeout – 0
Interface – All ports
Command Modes
Global Configuration Mode
User Guidelines
1. When the timeout vlaue is 0, the authenticator will use the re-authentication
period of the authenticator port
2. When create a user account without permission, auth-timeout and interface
values, system will assign default value to this account.
Example
switch(config)# dot1x local-database trendnet password
trendnet123 permission deny
Command History
Version
History
1.00.001
This command was introduced
radius-server host
To configure the details of RADIUS server.
Command
radius-server host <ip-address> [timeout <1-120>] [retransmit
<1-254>] key <secret-key-string>
no radius-server host <ip address>