TRENDnet TL2-E284 - Page 177

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
28-8
Syntax Description
global
Displays the MSTP global debug messages.
all
Displays all RSTP/MSTP debug messages.
errors
Displays the error code debug messages.
init-shut
Displays the initial and shutdown debug messages.
management
Displays the management related debug messages.
memory
Displays the memory related debug messages.
bpdu
Displays the BPDU related debug messages.
events
Displays the events related debug messages.
timer
Displays the timer related debug messages.
state-machine
Displays the state-machine related debug messages.
port-info
Displays the port information messages.
port-recieve
Displays the port received messages.
port-role-selectio
n
Displays the port role selection messages.
role-transition
Displays the role transition messages.
state-transition
Displays the state transition messages.
protocol-migration
Displays the protocol migration messages.
topology-change
Displays the topology change messages.
port-transmit
Displays the port transmission messages.
bridge-detection
Displays the bridge detection messages.
redundancy
Displays the redundancy related messages.
sem-variables
Displays the state-mechine vaiaables debug
messages.
Default Settings
Disable
Command Modes
Privileged EXEC Mode
User Guidelines
Using no form to disable the debug mode.
Example
switch# debug spanning-tree all
Command History
Version
History
1.00.001
This command was introduced