TRENDnet TL2-E284 - Page 203

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
30-7
Example
switch# show etherchannel
Port-channel Module Admin Status is enabled
Port-channel Module Oper Status is enabled
Port-channel System Identifier is 00:74:24:00:01:00
Maximum ports per Port Channel is 8 with maximum 8 active ports
Channel Group Listing
---------------------
Group : 1
----------
Protocol : LACP
switch# show etherchannel 1 detail
Port-channel Module Admin Status is enabled
Port-channel Module Oper Status is enabled
Port-channel System Identifier is 00:74:24:00:01:00
Maximum ports per Port Channel is 8 with maximum 8 active ports
LACP System Priority: 32768
Channel Group Listing
---------------------
Group: 1
----------
Protocol :LACP
Ports in the Group
------------------
Port : Gi0/1
-------------
Port State = Down, Not in Bundle
Channel Group : 1
Mode : Active
Pseudo port-channel = Po1
LACP port-priority = 128
LACP Wait-time = 2 secs
LACP Port Identifier = 25
LACP Activity : Active
LACP Timeout : Long
Aggregation State : Aggregation, Defaulted
LACP Port Admin Oper Port Port
Port State Priority Key Key Number State
-----------------------------------------------------------
Gi0/1 Down 128 1 1 0x19 0xa2
Port-channel : Po1
-------------------
Number of Ports = 1
HotStandBy port = null
Port state = Port-channel Ag-Not-Inuse
Protocol = LACP
MAC selection = Dynamic