YASKAWA Sigma-7 SGD7S Series

Fig. 87: Setup Wizard of the SigmaWin+
Normally the user does not need to set the tuning parameters individually.
Use the various SigmaWin+ tuning functions to set the related tuning parameters to
increase the response even further for the conditions of your machine. Refer to the fol-
lowing sections for details.
Ä Chap. 9.7 ‘Autotuning without Host Reference’ page 321
Ä Chap. 9.8 ‘Autotuning with a Host Reference’ page 339
Ä Chap. 9.9 ‘Custom Tuning’ page 350
You can also set the tuning parameters individually to make adjustments. Refer to the fol-
lowing section for details.
Ä Chap. 9.14 ‘Manual Tuning’ page 405
6.2.3 Notation for SERVOPACK Parameters
There are two types of notation used for SERVOPACK parameters that depend on
whether the parameter requires a numeric setting (parameter for numeric setting) or
requires the selection of a function (parameter for selecting a function).
Tuning Parameters
Sigma-7 Series SERVOPACKs
Basic Functions That Require Setting before Operation
Manipulating SERVOPACK Parameters (Pn) > Notation for SERVOPACK Parameters
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 132