10 Monitoring
10.1 Overview
This chapter provides information on monitoring SERVOPACK product information and
SERVOPACK status.
10.2 Monitoring Product Information
10.2.1 Items That Can Be Monitored
The items that can be monitored in the SigmaWin+ Product Information Window are listed
below.
Monitor Items
Information on SERVOPACKs
n Model/Type
n Serial Number
n Manufacturing Date
n Software version (SW Ver.)
n Remarks
Information on Servomotors
n Model/Type
n Serial Number
n Manufacturing Date
n Remarks
Information on Encoders
n Model/Type
n Serial Number
n Manufacturing Date
n Software version (SW Ver.)
n Remarks
Information on Option Modules
n Model/Type
n Serial Number
n Manufacturing Date
n Software version (SW Ver.)
n Remarks
10.2.2 Operating Procedures
Use the following procedure to display the Servo Drive product information.
n Select Read Product Information in the Menu Dialog Box of the SigmaWin+. The
Read Product Information Window will be displayed.
Sigma-7 Series SERVOPACKs
Monitoring
Monitoring Product Information > Operating Procedures
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 433
To Next Page
Loading...
