4. Click the Clear Button.
Fig. 384: Alarm Display - Clear Alarm History
ð
The alarm history will be cleared.
This concludes the procedure to reset the alarm history.
16.4.7 Resetting Alarms Detected in Option Modules
If any Option Modules are attached to the SERVOPACK, the SERVOPACK detects the
presence and models of the connected Option Modules. If it finds any errors, it outputs
alarms.
You can delete those alarms with this operation.
Sigma-7 Series SERVOPACKs
Maintenance
Alarm Displays > Resetting Alarms Detected in Option Modules
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 633
To Next Page
Loading...
