n When disposing of the product, treat it as ordinary industrial waste. However,
local ordinances and national laws must be observed. Implement all labeling
and warnings as a final product as required.
n Figures provided in this document are typical examples or conceptual repre-
sentations. There may be differences between them and actual wiring, circuits,
and products.
n The products shown in illustrations in this document are sometimes shown
without covers or protective guards. Always replace all covers and protective
guards before you use the product.
n If you need a new copy of this document because it has been lost or damaged,
contact your nearest Yaskawa representative or one of the offices listed on the
back of this document.
n This document is subject to change without notice for product improvements,
specifications changes, and improvements to the manual itself.
n We will update the document number of the document and issue revisions
when changes are made.
n Any and all quality guarantees provided by Yaskawa are null and void if the
customer modifies the product in any way. Yaskawa disavows any responsi-
bility for damages or losses that are caused by modified products.
1.6 Warranty
n Warranty Period
The warranty period for a product that was purchased (hereinafter called the “deliv-
ered product”) is one year from the time of delivery to the location specified by the
customer or 18 months from the time of shipment from the Yaskawa factory, which-
ever is sooner.
n Warranty Scope
Yaskawa shall replace or repair a defective product free of charge if a defect attribut-
able to Yaskawa occurs during the above warranty period.
This warranty does not cover defects caused by the delivered product reaching the
end of its service life and replacement of parts that require replacement or that have a
limited service life.
This warranty does not cover failures that result from any of the following causes.
– Improper handling, abuse, or use in unsuitable conditions or in environments not
described in product catalogs or manuals, or in any separately agreed-upon spec-
ifications
– Causes not attributable to the delivered product itself
– Modifications or repairs not performed by Yaskawa
– Use of the delivered product in a manner in which it was not originally intended
– Causes that were not foreseeable with the scientific and technological under-
standing at the time of shipment from Yaskawa
– Events for which Yaskawa is not responsible, such as natural or human-made dis-
asters
Disposal Precautions
General Precautions
Details of Warranty
Sigma-7 Series SERVOPACKs
General
Warranty
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 36
To Next Page
Loading...
