Fig. 322: Read Product Information
With the Digital Operator, you can use Fn011, Fn012, and Fn01E to mon-
itor this information. Refer to the following manual for the differences in
the monitor items compared with the SigmaWin+.
&
Σ-7-Series Digital Operator Operating Manual (Manual No.: SIEP
S800001 33)
10.3 Monitoring SERVOPACK Status
10.3.1 Servo Drive Status
Use the following procedure to display the Servo Drive status.
n Start the SigmaWin+. The Servo Drive status will be automatically displayed when
you go online with a SERVOPACK.
Fig. 323: Servo Drive Status
1 The Servomotor type is displayed.
2 The Servo Drive status is displayed.
Sigma-7 Series SERVOPACKs
Monitoring
Monitoring SERVOPACK Status > Servo Drive Status
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 434
To Next Page
Loading...
