YASKAWA Sigma-7 SGD7S Series

7.12.3 Applicable Tools
The following table lists the tools that you can use to initialize the vibration detection level
and the applicable tool functions.
Tool Function Operating Procedure Reference
Digital Operator Fn01B
& Σ-7-Series Digital Operator Operating
Manual (Manual No.: SIEP S800001 33)
SigmaWin+ Setup - Initialize
Vibration Detection
Level
Ä Chap. 7.12.4 ‘Operating Procedure’
page 248
7.12.4 Operating Procedure
Use the following procedure to initialize the vibration detection level.
1.
Click the Servo Drive Button in the workspace of the Main Window of the Sig-
maWin+.
2. Select Initialize Vibration Detection Level in the Menu Dialog Box.
ð
The Initialize Vibration Detection Level Dialog Box will be displayed.
Sigma-7 Series SERVOPACKs
Application Functions
Initializing the Vibration Detection Level > Operating Procedure
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 248