5. Click the Execute setting Button.
Fig. 136: Absolute Encoder - Setup AXIS #00 - Execute Setting
ð
The current alarm code and name will be displayed in the Alarm name Box.
6. Click the Continue Button.
Fig. 137: Setup Verification - Continue processing
ð
Click the Cancel Button to cancel resetting the absolute encoder. The previous
dialog box will return.
Sigma-7 Series SERVOPACKs
Basic Functions That Require Setting before Operation
Resetting the Absolute Encoder > Operating Procedure
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 189
To Next Page
Loading...
