9. Click the Continue Button.
Fig. 176: Multiturn Limit Setting - Warning
10. Click the Writing into the Motor Button.
Fig. 177: Multiturn Limit Setting - Writing into the Servomotor
ð
Click the Re-change Button to change the setting.
Sigma-7 Series SERVOPACKs
Application Functions
Absolute Encoders > Multiturn Limit Disagreement Alarm (A.CC0)
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 238
To Next Page
Loading...
