1.
Click the Servo Drive Button in the workspace of the Main Window of the Sig-
maWin+.
2. Select Adjust the Motor Current Detection Signal Offsets in the Menu Dialog
Box.
ð
The Adjust the Motor Current Detection Signal Offsets Dialog Box will be dis-
played.
3. Click the Continue Button.
Fig. 192: Adjust the Motor Current Detection Signal Offsets - Caution
Sigma-7 Series SERVOPACKs
Application Functions
Adjusting the Motor Current Detection Signal Offset > Automatic Adjustment
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 253
To Next Page
Loading...
