NoteAction
Tightening torque: 35 Nm.Secure the turning disk with its attachment
screws and washers.
2
Attachment screws: M8x25, Steel 12.9
Gleitmo 603 (24 pcs)
Washers: steel 8.4x13x1.5 (24 pcs)
xx1300000492
Concluding procedure
NoteAction
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section DANGER
- First test run may cause injury or damage!
on page 44.
1
296 3HAC044266-001 Revision: -
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.5.3 Replacing the turning disk
Continued
To Next Page
Loading...
