NoteAction
xx1300000664
Fit the retaining ring bore.5
xx1300000663
Apply Loctite 243 on the screws and secure
the shafts on both sides.
6
xx1300000837
Refit new VK covers.7
Grease: 3HAC042534-001
xx1300000832
Unscrew both screws in the cradle and fill
the bearing with grease from the inner hole
(see figure) until grease appears in the
outer hole.
8
Continues on next page
3HAC044266-001 Revision: - 363
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.6.2 Replacing the balancing device
Continued
To Next Page
Loading...
