Replacing a Pluggable Transceiver
6. Return the defective pluggable transceiver to ADVA Optical Networking as
described in Returning Equipment
Do not remove and insert a pluggable transceiver more often than
necessary. Frequent installation and removal of a pluggable
transceiver can shorten its lifespan.
After removing a pluggable transceiver from the interface cage, wait for at
least one second before you reinsert it or insert another one.
Be sure to clean the fiber-optic connectors before you reconnect them
into the optical ports of the replacement transceiver module.
l Inspecting and Cleaning Fiber-optic Connectors and Receptacles
l Electrostatic Discharge Damage Prevention and Warning
l Laser and LED Safety Guidelines and Warnings
l Handling Fiber-Optic Cables
l Handling Pluggable Transceivers
300 FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016)
To Next Page
Loading...
