Adva FSP 3000 - Page 325

Safety and Certification Marking Symbols
Symbol Publication Description
IEC 60825-1:2014 Ed. 3.0 Laser Class 1M symbol*
Appears on product safety labels to warn people
against potential laser radiation. The equipment
contains Class 1M lasers which are safe for all
conditions of use except when the beam passed
through magnifying optics (low risk to eyes, no risk
to skin).
IEC 60825-1:2014 Ed. 3.0
and IEC 60825-
2:2004+A1:2006+A2:2010
Laser Hazard Level 1M Symbol
Appears on product safety labels to warn people
against potential laser radiation. The FSP 3000 C
contains lasers up to laser class 1M and is a hazard
level 1M product which are safe for all conditions of
use except when the beam passed through
magnifying optics (low risk to eyes, no risk to skin).
ISO 3864-2 Graphical Symbol for "Consult the User
Documentation"*
Appears on product safety labels to ask people to
read and understand the user documentation before
installing and using this device. Read the message
on the label and follow the instructions carefully.
EN 50419: 2005 WEEE symbol (Only for EU member states)
Used for the marking of electrical and electronic
equipment and occurs on product labels or on
packaging (WEEE-Marking). The symbol indicates
that this product falls under the European Union's
WEEE Directive (2002/96/EC) and should be
disposed of by the user according to the EU
Directives and all national laws and regulations.
— CEmark
Indicates that the FSP 3000 C component meets the
requirements of the applicable EC directives.
— CB SIQ mark
Indicates that the FSP 3000 C component meets the
safety requirements of the Slovenian Institute of
Quality, a national Certified Body and member of
International CB Scheme.
— NRTL - BV mark
Indicates that the FSP 3000 C component meets the
safety requirements of the Bureau Veritas for USA, a
National Recognized Testing Laboratory. Modules
will have the first mark and shelves will have the
mark with a unique number.
FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016) 325