Adva FSP 3000 - Page 9

Required Tools and Equipment 215
Installing the CEM 215
Installing the ECM-2 216
Installing the FTM-2 in the SH12 216
Installing the FTM-4 in the SH4R 217
Installing the PSM-DC in the SH12 218
Installing the PSM-AC4 in the SH4R 218
Installing the Traffic Modules and Pluggable Transceivers 220
Required Tools and Equipment 220
Installing a Traffic Module 221
Installing a QSFPPluggable Transceiver 222
Installing the Slot Covers 225
Required Tools and Equipment 225
Installing a Module Slot Cover 225
Connecting the Infrastructure Modules 227
Required Tools and Equipment 227
Connecting the Infrastructure Modules 227
Providing Power to the Shelves 229
DCPower Overview 229
ACPower Overview 230
Prerequisites for Connecting the DC Power 231
Prerequisites for Connecting the AC Power 231
Required Tools and Equipment 232
Shortening and Assembling DCPower Cables 233
Connecting DC Power to the SH12 Shelf 234
Connecting ACPower to theSH4R Shelf 240
Connecting the Optical Cables 243
Overview 243
Prerequisites 244
Required Tools and Equipment 244
Connecting the Optical Cables 245
Routing Optical Cables Through the FMT/1HU 247
Installing the Front Cover 250
Required Tools and Equipment 250
Installing the SH12 Upper Front Cover 251
Installing the SH12 Lower Front Cover 252
Installing the SH4RFront Cover 253
Installing the FD-128D Front Cover 254
Optical Network Leveling 255
FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016) 9