Version 6.2 851 February 2011
SIP User's Manual 12. Configuration Parameters Reference
Parameter Description
RedirectPrefix, and SourceAddress) matches the IP-to-Tel
call, then the redirect number manipulation rule (defined by the
other parameters) is applied to the call.
The manipulation rules are done in the following order:
RemoveFromLeft, RemoveFromRight, LeaveFromRight,
Prefix2Add, and then Suffix2Add.
The RedirectPrefix parameter is used before any manipulation
has been performed on it.
Web: Redirect Number Tel -> IP
EMS: Redirect Number Map Tel to IP
[RedirectNumberMapTel2IP]
This ini file table parameter manipulates the redirect number for
Tel-to-IP calls. The manipulated Redirect Number is sent in the
SIP Diversion, History-Info, or Resource-Priority headers.
The format of this parameter is as follows:
[RedirectNumberMapTel2Ip]
FORMAT RedirectNumberMapTel2Ip_Index =
RedirectNumberMapTel2Ip_DestinationPrefix,
RedirectNumberMapTel2Ip_RedirectPrefix,
RedirectNumberMapTel2Ip_NumberType,
RedirectNumberMapTel2Ip_NumberPlan,
RedirectNumberMapTel2Ip_RemoveFromLeft,
RedirectNumberMapTel2Ip_RemoveFromRight,
RedirectNumberMapTel2Ip_LeaveFromRight,
RedirectNumberMapTel2Ip_Prefix2Add,
RedirectNumberMapTel2Ip_Suffix2Add,
RedirectNumberMapTel2Ip_IsPresentationRestricted,
RedirectNumberMapTel2Ip_SrcTrunkGroupID,
RedirectNumberMapTel2Ip_SrcIPGroupID;
[\RedirectNumberMapTel2Ip]
For example:
RedirectNumberMapTel2Ip 1 = *, 4, 255, 255, 0, 0, 255, , 972,
255, 1, 2;
Notes:
This parameter table can include up to 20 indices (1-20).
The manipulation rules are done in the following order:
RemoveFromLeft, RemoveFromRight, LeaveFromRight,
Prefix2Add, and then Suffix2Add.
If the table's matching characteristics rule (i.e.,
DestinationPrefix, RedirectPrefix, SrcTrunkGroupID, and
SrcIPGroupID) is located for the Tel-to-IP call, then the
redirect number manipulation rule (defined by the other
parameters) is applied to the call.
Redirect number manipulation for Tel-to-IP calls is not
performed if the CopyDest2RedirectNumber parameter is
enabled. This parameter copies the received destination
number to the outgoing redirect number.
The following parameters are applicable only to digital
interfaces: NumberType, NumberPlan, and
IsPresentationRestricted.
The parameters NumberType and NumberPlan are applicable
only to the SIP Resource-Priority header.
To Next Page
Loading...
