9G –8 INTERIOR TRIM
DAEWOO M-150 BL2
D109E547
4. Remove the trim panel.
D Remove the screws (1).
D Remove the clips (2).
D Remove the trim panel (3).
5. Remove the inside channel weatherstrip. Refer to
Section 9P, Doors.
D109E548
Installation Procedure
1. Install the inside channel weatherstrip. Refer to Sec-
tion 9P, Doors.
2. Install the trim panel with the screws and the clips.
3. Install the door pull with the screw.
4. Install the window regulator handle. Refer to Section
9P, Doors.
5. Install the inside door handle. Refer to Section 9P,
Doors.
D109E549
REAR DOOR INTERIOR GARNISH
MOLDING
Removal Procedure
1. Pry off interior garnish molding.
D Pry off the garnish molding caps (1).
D109E550
Installation Procedure
1. Install the interior garnish molding.
To Next Page
Loading...
