5B–52 FIVE-SPEED MANUAL TRANSAXLE
DAEWOO M-150 BL2
SPECIFICATIONS
GENERAL SPECIFICATIONS
Application Description Unit Standard Limit
General Type Forward gear – Synchronized
mesh type
–
Reverse gear – Sliding mesh
type
–
Gear ratio 1st – 3.818 –
2nd – 2.210 –
3rd – 1.423 –
4th – 1.029 –
5th – 0.837 –
Reverse – 3.583 –
Final drive ratio – 4.444 –
Fluid capacity L(qt) 2.1 (2.21) –
Fluid classification – 75W-85 (GL-4) –
Service Key groove width of 1st gear mm(in.) 8.2 (0.323) 8.6 (0.339)
synchronizer ring
2nd, 3rd, 4th gear mm(in.) 9.6 (0.378) 10.0 (0.394)
5th gear mm(in.) 9.4 (0.370) 9.8 (0.386)
Shift fork end
thickness
Low speed shift fork
(1st~2nd)
mm(in.) 8.7 (0.343) 8.1 (0.319)
High speed shift fork
(3rd~4th)
mm(in.) 7.8 (0.307) 7.2 (0.283)
5th gear shift fork mm(in.) 7.8 (0.307) 7.2 (0.283)
Clearance between gear and synchronizer
ring
mm(in.) 1.0 (0.039) 0.5 (0.020)
Clearance between sleeve and shift fork mm(in.) 0.2 – 0.6
(0.008 – 0.024)
1.0 (0.039)
Thrust free play of differential side gear mm(in.) 0.05 – 0.33
(0.002 – 0.013)
–
Speedometer gear ratio(Driven/Drive) – 17/18 (0.944) –
To Next Page
Loading...
