Daewoo MATIZ - Front Strut

2C –20 FRONT SUSPENSION
DAEWOO M-150 BL2
D106B715
D Install the inner wheel bearing oil seal (7).
3. Install the steering knuckle assembly.
Refer to “Knuckle Assembly” in this section.
D106B716
FRONT STRUT (INCLUDING COIL
SPRING)
Tools Required
09940–71430 Front Spring Compressor.
Disassembly Procedure
1. Remove the strut assembly. Refer to “Strut Assem-
bly” in this section.
2. Compress the front spring with the front spring com-
pressor 09940–71430.
Caution: During compressing spring, do not make
spring end point to operator or dangerous direc-
tion.
D106B717
3. Fix the strut support using the bench vise and remove
the strut nut.
a. Strut nut.