1F–32 ENGINE CONTROLS
DAEWOO M-150 BL2
MAA1F030
MALFUNCTION INDICATOR LAMP ON STEADY
Circuit Description
When the ignition is turned ON, the Malfunction Indica-
tor Lamp (MIL) will be turned ON and remain ON until
the engine is running, if no Diagnostic Trouble Codes
(DTCs) are stored. Battery voltage is supplied through
the ignition switch directly to the MIL telltale. The Engine
Control Module (ECM) controls the MIL by providing a
ground path through the MIL control circuit to turn ON
the MIL.
To Next Page
Loading...
