INSTRUMENTATION/DRIVER INFORMATION 9E–7
DAEWOO M-150 BL2
D19B304B
DIGITAL CLOCK
Condition
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Probable Cause
Correction
ÁÁÁÁÁÁÁÁÁ
Digital Clock Inoperative
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
D The open or a short in the power supply
circuit to the fuse Ef2 regardless of the
ignition position.
ÁÁÁÁÁÁÁÁÁ
D Repair or Replace the power
supply circuit wiring harness.
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
D The open or a short in the power supply
circuit to the fuse F1 with the ignition
position I.
ÁÁÁÁÁÁÁÁÁ
D Repair or Replace the power
supply circuit wiring harness.
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
D The open or a short in the power supply
circuit to the fuse Ef12 with the interior
courtesy lamp ON.
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁ
D Repair or Replace the power
supply circuit wiring harness.
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
D The circuit between the fuse Ef2 and the
fuse F12 is open or short.
ÁÁÁÁÁÁÁÁÁ
D Repair or Replace the wiring
harness.
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
D Fuse Ef2, Ef12, F1 or F12 is blown.
D Replace and fuse.
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
D The circuit between the fuse F12 and the
digital clock connector.
D Repair or Replace the wiring
harness.
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
D The circuit between the fuse F1 and the
digital clock connector.
ÁÁÁÁÁÁÁÁÁ
D Repair or Replace the wiring
harness.
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
D The circuit between the Ef12 and the
digital clock connector.
ÁÁÁÁÁÁÁÁÁ
D Repair or Replace the wiring
harness.
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
D Faulty digital clock.
D Replace the digital clock.
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
D Open ground (G201) circuit.
D Repair the open ground
circuit.
To Next Page
Loading...
