9R –8 BODY FRONT END
DAEWOO M-150 BL2
D109C535
HOOD LATCH RELEASE LEVER
(Left–Hand Drive Shown, Right–Hand
Drive Similar)
Removal Procedure
1. Remove the hood latch nut into the instrument panel.
a. Hood latch nut.
D109C536
2. Remove the hood latch release lever.
D Disconnect the cable (1).
D Remove the hood latch release lever (2).
D19C536A
Installation Procedure
1. Connect the hood latch release cable to the hood
latch lever.
D109C537
Notice: Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use the correct
fasteners to prevent premature corrosion.
2. Install the hood latch lever release to the instrument
panel with the hood latch nut.
To Next Page
Loading...
