GLASS AND MIRRORS 9L–7
DAEWOO M-150 BL2
D19E508A
9. Check for waterleaks by pouring water on the wind-
shield. If a leak is found, dry the windshield and fill
the area that leaks with adhesive. If the leak per-
sists, remove the windshield and repeat the entire
procedure.
10. Install the inside rearview mirror. Refer to “Inside
Rearview Mirror” in this section.
11. Install the cowl vent grille. Refer to Section 9R, Body
Front End.
D19E509
REAR WINDOW GLASS
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the rear window defogger electrical con-
nectors.
D19E510
3. Using the glass sealant remover J–24402, cut the
adhesive around the rear window glass.
D19E503
4. Remove the rear window glass from the vehicle.
5. Using a knife, remove the adhesive from the rear win-
dow glass.
6. Using a knife, remove the adhesive from the rear win-
dow frame.
To Next Page
Loading...
