1D–18 ENGINE COOLING
DAEWOO M-150 BL2
FASTENER TIGHTENING SPECIFICATIONS
Application NSm Lb-Ft Lb-In
Engine Coolant Temperature Sensor 10 – 89
Coolant Temperature Sensor 20 15 –
Coolant Pipe Bolt 8 – 15 – 71 – 130
Electric Cooling Fan Motor Nut 3.0 – 3.2 – 27 – 28
Electric Cooling Fan Assembly Bolt 3.5 – 4.5 – 31 – 40
Distributor Case Bolt/Nut 8 – 12 – 71 – 106
Radiator Mounting Bracket Bolt 3.5 – 4.5 – 31 – 40
Thermostat Housing Bolt 8 – 15 – 71 – 130
Water Inlet Cap Bolt 8 – 12 – 71 – 106
Coolant Pump Bolt/Nut 9–12 – 80 – 106
Coolant Pump Stud Bolt 9–12 – 80 – 106
To Next Page
