EXTERIOR TRIM 9M–5
DAEWOO M-150 BL2
D209B111
TAILGATE HANDLE
Removal Procedure
1. Disconnect the negative battery cable.
2. Open the tailgate.
3. Remove the tailgate lock cylinder. Refer to Section
9P, Doors.
4. Remove the license plate lamps. Refer to Section 9B,
Lighting Systems.
5. Remove the tailgate handle.
D Remove the screws (1).
D Remove the tailgate handle (2).
D209B112
Installation Procedure
1. Install the tailgate handle with the screws.
2. Install the license plate lamps. Refer to Section 9B,
Lighting Systems.
3. Remove the tailgate lock cylinder. Refer to Section
9P, Doors.
4. Connect the negative battery cable.
To Next Page
Loading...
