Daewoo MATIZ - 9 P-2; Outside Rear Door Handle; Door Lock Cylinder

9P –18 DOORS
DAEWOO M-150 BL2
D109C596
Installation Procedure
1. Install the outside front door lock handle with the
bolts.
2. Install the front door lock rods.
3. Connect the negative battery cable.
D109C597
OUTSIDE REAR DOOR HANDLE
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the rear door lock. Refer to “Childproof Rear
Door Lock” in this section.
3. Remove the outside rear door handle.
D Remove the bolts (1).
D Remove the outside rear door handle (2).
D109C598
Installation Procedure
1. Install the outside rear door handle with the bolts.
2. Install the rear door lock. Refer to “Childproof Rear
door Lock” in this section.
3. Connect the negative battery cable.
D109C599
DOOR LOCK CYLINDER
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the outside door handle. Refer to “Outside
Front Door Handle” in this section.
3. Remove the door lock cylinder from the outside door
handle.
D Remove the clip (1).
D Remove the door lock cylinder (2).