4A –2 HYDRAULIC BRAKES
DAEWOO M-150 BL2
DESCRIPTION AND OPERATION
WARNING LAMP OPERATION
This brake system uses a BRAKE warning lamp located
in the instrument panel cluster. When the ignition switch
is in the III position, the BRAKE warning lamp should il-
luminate. It should go off when the ignition switch return
to II position. The following conditions will activate the
BRAKE warning lamp.
D The lamp should be on whenever the parking brake
applied and the ignition switch is in the II position.
D A low fluid level in the master cylinder will turn the
BRAKE warning lamp on.
D17A007A
To Next Page
Loading...
